|
23 Litre gas hot water storage heater, direct spark - ignition, lightweight and lockable door. Great range of spare parts available for this brand. Greater Overall Efficiency—Incorporating advanced design concepts, Atwood water heaters are the most efficient, versatile heaters available for recreation vehicles — making it easier than ever to travel with the comforts of home. Additional features: Serviceable—95% of all serviceable components are accessible through the exterior door. This reduces service time and virtually eliminates the need for service personnel to enter your RV. Multiple protection features—Problems are prevented with the high temperature limit switch, thermostat, and pressure and temperature relief valve. An externally sealed combustion chamber keeps the outside of the unit clean. Pre-skin installation—Atwood water heaters can be installed and tested on the RV floor before the sidewalls are set in place. This gives DIY builders more flexibility and virtually eliminates potential problems by testing the unit before the skinning is installed. Mounting is flush into the RV sidewall for an integrated, attractive appearance. Hole cutout should be be 320mm high and 410mm wide. You'll need a depth of 400mm. Water Connections: Inlet is 1/2 inch BSP female, Outlet is 1/2 inch BSP female
Gas Connection: The heater has a 3/8 inch SAE male connection. This can connect to either 3/8 inch SAE nut with to 3/8 or 5/16 inch copper pipe.
Electrical Connection: 12volt wiring (not included) is required to connect to a 12V DC source for auto ignition. Aluminium clad tank—Less weight and the cladding eliminates the need for an anode rod.
|
