|
Camec 3 point main door lock. Left hand. These locks suit the Camec security door. New lock in 2012 but fits all existing 3 point lock doors.
FeaturesThis is the main lock at the centre of the door, the upper and lower locks called remote locks and are a separate item.This does NOT include the lock barrel, it is a separate item. This fits a door with the hinges on the left, when looking from the outside of Recreational Vehicle. Remove the three screws to release outer and inner lock. The third is hiding behind the central slide up/down catch on the inside of handle.
To Add the lock barrel
Place the RED key in the barrel and insert barrel. Remove RED key (requires force).
SpecificationsThis replacement lock is One-Key Compatible - it has a Aqua/Grey logo on handle
Suits CAMEC 3 Point lock door - with hinge on the left (looking from outside)
NO lock barrel or keys are included
Barrels from pre-2012 locks that did NOT have a logo will NOT fit this handle
Click to View Installation Instructions
CommentsRemoving lock barrel from early model handle without Aqua/Grey logo on handle
After removing lock assembly from the door, hold the handle open and turn and pull the rear metal lock activator (cylinder).
To remove the key barrel, working from the rear, depress the small metal waffer into the lock while the lock is rotated so the square protrusions on the lock line up with the gaps in the housing. The lock should now slide out the front.
To Add the lock barrel to early model handle without Aqua/Grey logo on handle Place the key in the lock and turn so the square protrusions on the lock line up with the gaps in the housing. Place the barrel at an angle so the waffer enters the housing first and depresses itself while the remainder of the lock to pushed in. The waffer should pop out to secure the lock inplace.
|
