Click to enlarge

Dometic Vent & Flue Kit, 5 piece, AS1625, Current style. (excludes T-piece usually required). The advanced ventilation system -Model AS1625- was especially designed to provide optimum ventilation and therefore significantly better cooling performance of the Dometic absortion refrigerator.

Features

The bottom grill lets fresh cool air in, while the top vent has two outlet sections. The small section on the right takes the exhaust gases/heat directly outside and the larger section takes the warmed up air that flows past the fridge fins to the outside.

The aluminiun pipe and plate shown slides into the small side vent prior to the vent grill being inserted. This tube then slopes down to the exhaust flue on the rear of the fridge. The black T-piece (separate part, additional cost) sits onto the top of the fridge chiminy and slopes up into the Aluminium tube. (the lower, open end of T-piece allows further air flow to assist the exhaust. The T-piece extension (separate part) can be used if the upper vent needs to set higher.

The mounting frames are held in with 10 screws. The kit also comes with the metal parts shown to connect the fridge flue to the top vent.

This kit should be used with all Dometic absortion refridgerators to ensure warranty conditions are meet.

Replacement parts are available.

The 2008 model is the same size, but varies slightly from the earlier vent.

Please note that kit almost always requires the parts TP and TPX shown as related parts.

Specifications