|
Window Protector Shade
The privacy room needs an F45 awning to attach to, to make a complete room.
The length is the defined awning length which should be shown
on the awning case. The height is measured at the side of the RV (see enlarged
image for more info.). An extra fold-in section at the base allows it to extend
another 300mm if required.
Turn your existing Fiamma canopy into a fully enclosed awning
and double your living area with a Fiamma Privacy Room. This is designed to
fit perfectly with the F45i and F45 Ti awning. By following the included instructions
and template the Clip system can be reduced using a hacksaw to fit the F45plus.
In the latter case the front and end wall are wrapped around the end pole that
holds the walls snug against the RV.
New stylish white fabric is easier to clean and more complimentary
to the majority of modern motor caravans. The new awning fabric also offers
greater durability than previous versions and is more versatile as the roll-up
(front panel also rolls up) front doorway is now an independant panel, which
may be used on the front left or right hand side, according to preference.
The side panel windows are now clear instead of mottled, these
can still be rolled up to expose a large mosquito net panel, which provides
adequate ventilation.
All Privacy Rooms are supplied as standard with a complete
set of curtains for the front and side windows in the latest Oslo pattern.
There are plenty of pegging points on the inside and the outside
of the Privacy in case of inclement weather. The new Fiamma 'Clip System' guarantees
a 100% water tight seal between the awning canopy fabric and the Privacy Room
side walls; this is achieved using the new Clip System.
The Clip System is effectively a clamping system, with an
upper and a lower section that clamp around the awning roof fabric. The Clip
System also incorporates a 'C' channel, which allows the side panel to fit into,
once this has been fitted the roof fabric clamping procedue begins.
Because the Clip System is very strong, there is no need to
use the 'Rapid Set' (as with previous models) to support the side panels, this
reduces set-up and packing away times and the Privacy's pack size!
Complete or partial installation in a couple of minutes with
the front and side panels connecting via self-lubricating zips. Supplied with
pegs, ladder bands, guylines, instructions and a carry bag .
Video
1 showing opening the F45i awning and adding the first PRIVACY ROOM WALLS.
3.9 mb
Video
2 showing opening adding remaining PRIVACY ROOM WALLS. 3.7
mb
Video
3 showing completion of the PRIVACY ROOM 3.4
mb
SpecificationsSuits F45 plus (trim required)
Suits F45 i
Suits F45 Ti
|
