|
85litre, poly tank with pump, 810 x 610 x 240mm Heavy Duty, roto moulded Polyethelene water tank.
FeaturesThis is UV stabilised, food grade polyethelene with an average wall thickness of 6mm. The inbuilt strength means that mounting brackets and protective sheeting is not required. These feature built-in mounting holes along each side and also include baffles to reduce water surge during travel.The tanks include 3 x 3/4 inch Brass BSP female thread for inlet/outlet. All openings come with blank plugs, threaded fittings are sold separately. These have a 40mm raised top to provide more storage than the 70 litre model, that may fit between chassis rails, there is a 3/8" BSP female threaded breather on the raised section, at the end, no cap provided for this, as it must have some breather installed, to allow tank to completly fill.
This tank comes with an installed 12V Powerflo 3.8 litres/min pump, 40psi with a weighted strainer pickup and automatic pressure switch that turns the pump on when the tap is turned on. Pump outlet is a 3/8" (10mm) hose barb. A separate model is available without the pump and strainer installed.
SpecificationsSize is 810mm x 610mm x 240mm*( Size may vary +/- 3% due to manufacturing process).
|
