|
Suburban / SW5EA, 240V Storage hot water system, with door.These are Manufactured in USA. feature a steel tank with porcelain lining.
FeaturesCompletere with replaceable anode rod for corrosion protection, the anode rod is located on the bottom of HWS and easy to access, you simply unscrew this to drain the tank of water during winter. If the rod is mostly eaten away, simply replace it with a new one. The door section then slides into the same hole and neatly covers the cladding with a side overlap. The total door size is 380mm square. The water inlet and outlet are at the rear so allow some space for connections, whilst 240V gets connected to wiring block.
Pressure relief value has a compression fitting to suit 1/2 inch copper pipe.
The unit comes with the main tank as shown, plus a separate door.
Easy access, Foam tank insulation and high recovery rate.
Spare parts are available.
Specifications18.9 litre capacity.
This model is 240V only.
Dimensions H320mm x W320mm x ( D450mm plus pipe connections at rear)
includes door
Weight=14.5 kg
Recovery time = 35mins.
Cold water inlet is 1/2 inch female BSP.
Hot water outlet is 1/2 inch female BSP.
The unit will slide in from the outside, in a cutout of 330mm high and 325mm wide.
Click to View Frequently Asked Questions
|
